* Car completely turned off
* Plugin adapter in OBD port
* Start UCDS
* Enable Can Mode
* Goto "Mondeo 5"
* Press Read DTC
* Turn on car
As soon as I turn on the car things "go wrong" (even before pressing "continue" in the ucds program). The car starts to give errors of about every system it has. If I unplug the device, the errors go away (except for a 'visit dealer' icon, that goes away after a certain time).
As soon as I press "continue" I get the following log (shortened a bit since its the same throughout the log):
The main issue seems that modules are losing connection with other modules (as soon as I plugin the UCDS/odb adapter).All modules reading DTC stating...
16:18:46 zondag 12 november 2017
---------------------------------------
DTC Error read - ABS
The module does not answer
---------------------------------------
DTC Error read - ACCM
The module does not answer
---------------------------------------
DTC Error read - ACM
The module does not answer
---------------------------------------
DTC Error read - AHCM
The module does not answer
---------------------------------------
DTC Error read - APIM
DTC Errors: 2
U0151 - Lost Communication With Restraints Control Module
U0151 - Lost Communication With RCM
Ext.Status: 2B - Closed.(DTC) Present at Time of Request.
00- Error status not found in base....
U0155 - Lost Communication With Instrument Panel Cluster Control Module
U0155 - Lost Communication With The Instrument Panel Cluster Control Module
Ext.Status: 2B - Closed.(DTC) Present at Time of Request.
00- Error status not found in base....
---------------------------------------
DTC Error read - BCM
DTC Errors: 5
U0212 - Lost Communication With SCCM
U0212 - Lost Communication With Steering Column Control Module
Status: 87 - Missing Message
Ext.Status: 0A - Minimum Adaption Limit Not Reached.(DTC) Present at Time of Request.
U0151 - Lost Communication With Restraints Control Module
U0151 - Lost Communication With RCM
Status: 87 - Missing Message
Ext.Status: 8A - Minimum Adaption Limit Not Reached.(DTC) Maturing - Intermittent at Time of Request.
U0121 - Lost Communication With ABS Control Module
U0121 - Lost Communication With The ABS Control Module
Status: 87 - Missing Message
Ext.Status: 0A - Minimum Adaption Limit Not Reached.(DTC) Present at Time of Request.
U0131 - Lost Communication With PSCM
U0131 - Lost Communication With Power Steering Control Module
Status: 87 - Missing Message
Ext.Status: 0A - Minimum Adaption Limit Not Reached.(DTC) Present at Time of Request.
B1026 - Steering Column Lock
B1026 - Send Button Circuit Failure
Status: 93 - No Operation
Ext.Status: 0A - Minimum Adaption Limit Not Reached.(DTC) Present at Time of Request.
---------------------------------------
I also tried ForScan and ForScan only seems to detect the HS-CAN, nothing else . The modules that it finds are the same ones that are throwing the above errors.
I've written to support, but may be someone else had a similar problem and can possibly help me.
Regards, J.