UCDS Forum

Thanks @kroligoff

Package installed perfectly on my Sync3 with Navigator. Now SYNC3 3.0 build 17144.
I think this update package is Chinese, because GraceNote reports the version 1.1.1.1124 (CN-0010).

Thanks friend.

Reinstall after deleting
JR3T-14G423-EA.tar.gz from main SyncMyFile main folder ...

AND delete from autoinstall.lst
Item2 = Installation of GRACENOTES
Open2 = SyncMyRide\JR3T-14G423-EA.tar.gz

This should install update without adding Gracenote for China!!

Does anyone have 3.0 Build 17194?
Seems to be the latest Build in APIM production:
https://images84.fotosik.pl/779/39b2dfe3f4bab3c9.jpg

Both of the new builds of Sync 3 2.3 (17109) and 3.0 (17194) work well. I have been using 3.0 for the last week or so now after I was given the files for North America.

http://www.2gfusions.net/showthread.php ... #pid131935

Hi DanMc85,
Where can I find the SYNC3 v3.0 build 17194 update?

Thanks

Diamondear писал(а):Hi DanMc85,
Where can I find the SYNC3 v3.0 build 17194 update?

Thanks

Ford hasn't released it yet.

Diamondear писал(а):Where can I find the SYNC3 v3.0 build 17194 update?

There is v3.0 for EU with Voice pack and Gracenotes:
https://drive.google.com/open?id=0B_1UH ... nFEM2tFd0U

@Foroxon

Thank's my friend.

Thanks!

Do you know if is possible to uninstall/delete Gracenote from Sync?

Szutek писал(а):Do you know if is possible to uninstall/delete Gracenote from Sync?

No uninstall or delete, only upgrade, downgrade, but could be disabled in options of sync 3

Hi,

Have you also noticed that updating SYNC3 with the "JR3T-14G381-AG" v3.0 build 19194 package results in HASH imprinting and does not appear in the Software List installed in the APIM?

This detail can be seen in the Diagnostics section of the APIM -> IVSU Version.

I also look forward to you.

Diamondear

Does anyone have a link to Build 17276 for EU cars?

Hi there and greetings from Switzerland

First of all SORRY if the following has been asked before but I am new to Sync3 and trying to get it to EU Specs.... And I really don't want to brick my Sync3 with a wrong firmware install.

I have a US Sync 3 v2.2 in my 2017 Mustang GT350 and would like to switch it to EU spec. with EU languages (German + if possible French and others if available) and if possible EU maps as the US maps are useless to me in Switzerland.

1.) Can I just install the EU firmware according to the instructions posted by @kroligoff (https://www.ucdsys.ru/forum/viewtopic.p ... 740#p13230) ?

kroligoff писал(а):If current install 2.2 Sync 3
Try...
Download EU Sync3 Language Pack for 2.2
http://ivsu.binaries.ford.com/swparts/H ... 604.tar.gz

1) Make folder SyncMyRide and copy EU LP
2) Make file "Autoinstall.lst", contains:

Код: Выделить всё

[SYNCGen3.0_ALL]
Item1 = HN1T-14G391-AC
Open1 = SyncMyRide\HN1T-14G391-AC_57604.tar.gz
Options = Delay, AutoInstall

2.) Or do I have to proceed as described by @Diamondear (https://www.ucdsys.ru/forum/viewtopic.p ... 740#p13325) ?

Diamondear писал(а):Hi,
no problem.

Retrieve packets and assemblages as in the attached screenshot.

Diamondear

3.) Or should I directly install v3.0 as posted by @Foroxon?

Foroxon писал(а):Diamondear wrote:
Where can I find the SYNC3 v3.0 build 17194 update?

There is v3.0 for EU with Voice pack and Gracenotes:
https://drive.google.com/open?id=0B_1UH ... nFEM2tFd0U

4.) Do I have to install any additional files?

5.) Will my Sync3 afterwards be fully functional and work with future updates?

6.) Will changing the Sync3 to EU also change my Infodisplay to EU on the instrument cluster?

7.) I have read everywhere that map updates have been scarce in EU so far. But can I get EU maps somewhere? Only at a Ford Dealer?

8.) Do I have to code any other changes than changing the country code of the APIM Module and maybe code the radio region to EU in ACM?

Thank you very much for your help and best regards from Switzerland
realswiss

cantaloop.li писал(а):Does anyone have a link to Build 17276 for EU cars?

https://drive.google.com/open?id=0B_1UH ... V91RTdUOGs