UCDS Forum

Diamondear писал(а):

mondeo205 писал(а):Is there anybody else, who has also faced the issue that the symbol for the automatic light is missing with the KS7T firmware?

Hi,
I confirm that the symbol does not exist on this new calibration.

The ice symbol on the road is also missing.

See photos.

The ice symbol shows up on mine still. It was 36*F here this morning. The symbol was there.

On German forum they reported this problem aswell with some symbols (Auto light,...) not showing anymore.

Not gonna install this version, until this problems are fixed!

It is not a problem with IPC new software... new Mondeo Mk5 / Fusion have new HCM calibration for new FDL and this depends of that symbol.

Possible to install those HCM software on older hardware?

After the problem that my clock in SYNC2 always lost 5 minutes in the morning I downgraded the IPC to 2017 data. But now the climate control disappeared...?!! After the IPC Update I made a reset of the PAM and the APIM because of errors reported in Forscan...

EDIT: Now I suceeded after 6 or 7 tries to downgrade the PAM (FU5T-14C090-BF to updated version FU5T-14C090-BL) to the version FU5T-14C090-BJ as follows:

SBL F1GT-14C093-AA

1 FU5T-14C090-BL

2 FS73-14C647-ZD

The persisting problem was the missing climate control, but now I still have the error in Forscan 2.3.15 that the PAM has wrong configuration data.... Does anybody have any solution for that?? The module number is FU5T-15K866-BF.

Now you have to find the last calibrations for the HCM module to make the automatic lights icon reappear on the IPC.

My HCM:

Part number: DG9T-13C148-BH
Strategy: DG9T-14D063-BH


What is the last calibration available?

hi

I looking for readouts

SPC5606S

FS7T-10849-ALB
CD391

or

similar

I wonder if it's a HCM issue, cause when u do the test on the IPC with latest firmware, those symbol is no longer present, so nothing to do with the HCM, cause the test NEED to show EVERY symbol still present on the IPC

@dragunov

Hi,
if you do, there is also an ice symbol in the IPC test mode, but if you see the photo just added, see that the symbol is lit at a temperature of 4 ° C. Temperature here in Turin this morning.

You should find the new HCM calibration and verify that it works.
We have to wait.

Diamondear
What is a Towl Haul on the IPC screen?

Indeed, but they talk about the autobeam symbol, those one is not present it seems

Some0neElse писал(а):Diamondear
What is a Towl Haul on the IPC screen?

Hi,

but are you referring to the anti-collision radar icon in the right quadrant?

Hello,
do you know anyone also IPC firmware version for S-max?
Thank you

this is the same

but part number is EM2T-10849-LH and FW also EM2T