UCDS Forum

Auto headlights still missing

Diamondear писал(а):Now you have to find the last calibrations for the HCM module to make the automatic lights icon reappear on the IPC.

My HCM:
Part number: DG9T-13C148-BH
Strategy: DG9T-14D063-BH

What is the last calibration available?

The current software and calibration version are the same.

dragunov писал(а):Auto headlights still missing

The auto high beam sign in the IPC seems to not be desired by Ford anymore. On a new Mondeo shipped with IPC software KS7T-14C026-AJD is the Bit 38 in 720-01-01 deleted. Setting this bit to zero will disable "Auto High Beam Telltale".

I prefer this option, so I no longer gonna update my firmware

The auto high beam is still working, only the white auto high beam telltale is gone and I don't miss this telltale. The blue high beam telltale is still visible.

Soon I will update my IPC to the latest version available:

CA-BUS: HS3
SBL (Bootloader): EJ7T-14C025-AA

2019 MY:
KS7T-14C026-AJD
KS7T-14C026-BJD
KS7T-14C088-AJD
KS7T-14C088-BJD

- Firmware Build Date: March 22, 2019


Currently I have those of October 2 2018:

KS7T-14C026-AJB
KS7T-14C026-BJB
KS7T-14C088-AJB
KS7T-14C088-BJB

Has anyone already installed these?

Yes, KS7T-14C026-AJD works fine on my car, only the Auto High Beam Telltale is still missing.

I also tried LS7T-14C026-AJA. But with this I had the menu "Driver assist/Pre-collision Assist/Evasive steering" in the IPC, although my car does not have PCA. And I had the permanent DTC "U0198 - Lost Communication With Telematic Control Module" in my IPC. So I went back to KS7T-14C026-AJD.

@AmigaSurfer

Hi

I have regularly updated my IPC smoothly with this KS7T-14C026-AJD calibration. No problem as also confirmed by you.

2020 MY:
LS7T-14C026-AJA
LS7T-14C026-BJA
LS7T-14C088-AJA
LS7T-14C088-BJA

- Firmware Build Date: June 13, 2019

I also try to install this new calibration, let's see if I get the same error as you.


NOTE of 08/10/2019

I updated my IPC with the newest version and I also found an error in DTC "U0198 -00: 0A".
The error is due to the fact that an "Emergency steering" option has appeared in the collision avoidance menu which is not
compatible with CCM and IPMA modules.
As soon as I have time I try to disable this option from the IPC configuration.

It is not possible to deactivate it directly from the IPC.

AmigaSurfer писал(а):Yes, KS7T-14C026-AJD works fine on my car, only the Auto High Beam Telltale is still missing.

I also tried LS7T-14C026-AJA. But with this I had the menu "Driver assist/Pre-collision Assist/Evasive steering" in the IPC, although my car does not have PCA. And I had the permanent DTC "U0198 - Lost Communication With Telematic Control Module" in my IPC. So I went back to KS7T-14C026-AJD.

I updated the first post with newer VBF build info for LS7T version. I believe the TCU DTC issue is resolved. I haven't checked on the Evasive Steering menu option showing.

I had a similar idea and bought a 2013 MKZ IPC DP5T-10849-CJ. The VBF loader successfully loads the EJ7T-14C025-AA File when using Fusion 2013 as car model, but the next step fails with the message "unable to erase flash". It does not depend on the calibration files (Lincoln MKZ or Ford Mondeo calibrations)....

Any idea's what happens?!

fotso писал(а):I had a similar idea and bought a 2013 MKZ IPC DP5T-10849-CJ. The VBF loader successfully loads the EJ7T-14C025-AA File when using Fusion 2013 as car model, but the next step fails with the message "unable to erase flash". It does not depend on the calibration files (Lincoln MKZ or Ford Mondeo calibrations)....

Any idea's what happens?!

DS7T-14C026-BJM
DS7T-14C026-AJK
DS7T-14C088-BJK
DS7T-14C088-AJK

That is the only firmware that will work on that cluster for the Fusion. That cluster only has a 512KB firmware eeprom, newer 2015+ MKZ clusters have double at 1MB

hallo,

und wo kann man die IPC Software download?

I have just purchased my UCDS and trying to find information before it arrives I have read on another forum that the traffic signs will not work if you update from FS7T/JS7T to KS7T. It says to get it working again you need to update the IPMA and I have read on this forum to stay away from doing that as there is a 90% chance of bricking the IPMA!

If anyone has any info on this I would really appreciate it as I really don't what to mess it up

Posted this on 2gustions too so sorry if you double read this.

Kind regards

Hey friends,

I've installed the Mondeo MK5 IPC in my 2016 Ford Ranger.
However, the communication to the PCM is missing and the fuel consumption is not determined correctly.

Where could it be?
The cabling I compare and is identical.

<m module="IPC">
<d DID="F110" Desc="On-line Diagnostic Database Reference Number" Data="DS-KM2T-1A292-JAB"/>
<d DID="F111" Desc="ECU Core Assembly Number" Data="DS7T-14F094-AJA"/>
<d DID="F113" Desc="ECU Delivery Assembly Number" Data="FS7T-10849-BLB"/>
<d DID="F124" Desc="ECU Calibration Data #1 Number" Data="KS7T-14C088-AJB"/>
<d DID="F162" Desc="Software Download Specification Version" Data="NRC: Request Out Of Range [0x31]"/>
<d DID="F163" Desc="Diagnostic Specification Version" Data="0x03"/>
<d DID="F188" Desc="Vehicle Manufacturer ECU Software Number" Data="KS7T-14C026-AJB"/

Diamondear писал(а):@AmigaSurfer

Hi

I have regularly updated my IPC smoothly with this KS7T-14C026-AJD calibration. No problem as also confirmed by you.

2020 MY:
LS7T-14C026-AJA
LS7T-14C026-BJA
LS7T-14C088-AJA
LS7T-14C088-BJA

- Firmware Build Date: June 13, 2019

I also try to install this new calibration, let's see if I get the same error as you.


NOTE of 08/10/2019

I updated my IPC with the newest version and I also found an error in DTC "U0198 -00: 0A".
The error is due to the fact that an "Emergency steering" option has appeared in the collision avoidance menu which is not
compatible with CCM and IPMA modules.
As soon as I have time I try to disable this option from the IPC configuration.

It is not possible to deactivate it directly from the IPC.

Diamondear, did you have to reflash your IPMA for the traffic signs to work with KS7T-AJD?

I updated to KS7T-AJD everything updated fine but I have now lost traffic signs, the display is there but there blank and don't update when I pass a speed sign

Anyone know how to get them working again ?