Страница 3 из 29
Re: прошивки панели высокого уровня Convers+ от Motral
Добавлено: 28 май 2014, 14:55
motral
zaqik писал(а):zaqik писал(а):car: mondeo mkIV, October 2012 with convers+
I updated convers+ to 1412 with parkassistant screen, PTC and lights for English.
keyless car
2 errors:
1. TEST MODE in IPC can be activated, but during few seconds is automatically finished
2. see to picture
Did you complete turn off the ignition of a car after firmware update?
Have seen this case once after update, but turning off and on ignition have fixed the problem.
Is it constant problem?
I have the keyless start car, this alert request works as should on mine.
Re: прошивки панели высокого уровня Convers+ от Motral
Добавлено: 28 май 2014, 15:05
motral
Artem505 писал(а):извините за глупый вопрос...
но хочется понять
есть ли какие нибудь ограничение в прошивки? Я имею виду если на Mondeo стоит приборка CONVERS+, то её 100% можно будет прошить?
этот автомобиль подходит для ПРОШИВКИ ПАНЕЛИ ВЫСОКОГО УРОВНЯ CONVERS+ ОТ MOTRAL ?
для старых дорестайлов нужно обновлять вместе с модулем PAM, если он версии 7G92- (это машины 06-08 гг выпуска)
для межрестайла (машины 10 г в кузове дорестайл) прошивка в тестировании, скоро будет доступна.
для рестайла никаких ограничений нет
Панель высокого уровня - это Конверс,
другие панели - это с мелким и средним красными монохромными экранами,
зря заголовок так обозвали - вводит в заблуждение
Re: прошивки панели высокого уровня Convers+ от Motral
Добавлено: 28 май 2014, 15:10
mayak
motral писал(а):
для рестайла никаких ограничений нет
but what about this:
http://www.ucdsys.ru/forum/viewtopic.ph ... t=15#p1967 ??
Re: прошивки панели высокого уровня Convers+ от Motral
Добавлено: 28 май 2014, 15:15
motral
it's not confirmed bug, I have updated about 5 car with keyless entry and keyless start without any problems
Re: прошивки панели высокого уровня Convers+ от Motral
Добавлено: 28 май 2014, 15:24
motral
niv26 писал(а):
Леха, чего то я не понял, почему заголовок не верный? Выс уровень это же конверс? Или....?
тем что Etis не все читают, обычный владелец только Convers+ на приборке может прочитать и то не каждый
Re: прошивки панели высокого уровня Convers+ от Motral
Добавлено: 29 май 2014, 12:51
zaqik
motral писал(а):zaqik писал(а):
2 errors:
1. TEST MODE in IPC can be activated, but during few seconds is automatically finished
2. see to picture
Did you complete turn off the ignition of a car after firmware update?
Have seen this case once after update, but turning off and on ignition have fixed the problem.
Is it constant problem?
I have the keyless start car, this alert request works as should on mine.
ad 1. car was updated before 5 days .. I make video
ad 2. it is in car with alarm ... information about interion scan deactivation is combinated with logo Ford
Re: прошивки панели высокого уровня Convers+ от Motral
Добавлено: 29 май 2014, 12:52
zaqik
zaqik писал(а):car: mondeo mkIV, April 2008
I updated convers+ to 1007 with parkassistant screen, PTC and lights for English.
Experiences:
- update was OK
- screen with parkassistant is flashed quickly including car-image and text "PARKING MODE" ... it will better without car-image and text
- if lights is on, the flashing is more quickly ... WHY?
- average speed has maximum 26km/h in pointer DAILY COUTER (km) ... error???
some new information? customer is dissatisfied
Re: прошивки панели высокого уровня Convers+ от Motral
Добавлено: 29 май 2014, 13:27
motral
zaqik писал(а):zaqik писал(а):car: mondeo mkIV, April 2008
I updated convers+ to 1007 with parkassistant screen, PTC and lights for English.
Experiences:
- update was OK
- screen with parkassistant is flashed quickly including car-image and text "PARKING MODE" ... it will better without car-image and text
- if lights is on, the flashing is more quickly ... WHY?
- average speed has maximum 26km/h in pointer DAILY COUTER (km) ... error???
some new information? customer is dissatisfied
yes, got a fixed firmware, I'll ask Anatolij to update the app at nearest time.
the avg speed is not checked yet.
zaqik писал(а):motral писал(а):
Did you complete turn off the ignition of a car after firmware update?
Have seen this case once after update, but turning off and on ignition have fixed the problem.
Is it constant problem?
I have the keyless start car, this alert request works as should on mine.
ad 1. car was updated before 5 days .. I make video
ad 2. it is in car with alarm ... information about interion scan deactivation is combinated with logo Ford
You didn't answer no one my question.
I know that, have seen it once, after update instantly,
after completely ignition off and on the problem gone.
My car have this settings alarm on, I have full alarm with move sensor and all works as should
Re: Кастомные прошивки для приборной панели Конверс+
Добавлено: 29 май 2014, 13:29
mayak
TPMS patch for dorestyle is included in this custom soft?
I'm interested for my own car
Re: Кастомные прошивки для приборной панели Конверс+
Добавлено: 29 май 2014, 13:39
motral
mayak писал(а):TPMS patch for dorestyle is included in this custom soft?
I'm interested for my own car
nope, unavailable for all versions now,
it would be separated option for extra credit
Re: прошивки панели высокого уровня Convers+ от Motral
Добавлено: 29 май 2014, 13:50
zaqik
motral писал(а):You didn't answer no one my question.
I know that, have seen it once, after update instantly,
after completely ignition off and on the problem gone.
My car have this settings alarm on, I have full alarm with move sensor and all works as should
I am sorry I do not understand you - which question?
Car was updated and owner use it. I have 2 bugs from him (5 days after update). Both errors are repeated during using car.
Re: прошивки панели высокого уровня Convers+ от Motral
Добавлено: 29 май 2014, 21:21
motral
zaqik писал(а):
Car was updated and owner use it. I have 2 bugs from him (5 days after update). Both errors are repeated during using car.
please turn off the alarm request then turn back on, and tell me what happens
Re: Кастомные прошивки для приборной панели Конверс+
Добавлено: 30 май 2014, 11:12
wy852852
Hi Mortal
My friends Chinese Mondeo MK4.5 2.0T
IPC update 1412 by UCDS 1 credit second lvl(buy credit from Darkleo)
But screen havn't display front and rear radar,Darkleo tell me Mortal can do it (China IPC)
Pls hele me
Thank you
Best regards!
Re: Кастомные прошивки для приборной панели Конверс+
Добавлено: 30 май 2014, 11:14
zaqik
for MORTAL
ad 1. URL for video with comment is in PM
ad 2. alarm was deactivated in convers menu and set back ... no changes; alarm was set to "reduced guard" and set back ... no changes
Re: Кастомные прошивки для приборной панели Конверс+
Добавлено: 30 май 2014, 12:07
wy852852
zaqik писал(а):ad 1. URL for video with comment is in PM
ad 2. alarm was deactivated in convers menu and set back ... no changes; alarm was set to "reduced guard" and set back ... no changes
Sorry
I don't understand how to deactivated in convers
I do not found this set in convers menu
pls telle me to set detailed steps
thanks!
Regards