UCDS Forum

Hi everyone

I have problem with Ford Fusion 2017. I read original configuration file from BCM.
Mistakely I write wrong configuration file from another Ford - I have file in the same folder ( nevermind ).
Now - Car won't start and don't see key. I flash BCM with vbf loader but I must write original configuration. Please help me - is option to write conf file to BCM without ignition ?

you can use the hazard ligth to wake the systems up with
when we are using fdrs it tells us to turn igition on and if not possible turn hazard ligth on and go on so i think it migth be the way to do it and load the asbuilt data from etis
rgds sev

I see on the forum few person with the same problem. I need list with vbf files to make refresh BCM - with the last config file per vin. Anybody can help?

VIN: 3FA6P0HD8HR128405

BCM PART NUMBER : GU5T-14B476-CAJ

Aanybody can help ?

For you BCM GU5T-14B476-CAJ:
SBL: DG9T-14C187-AB
1: GU5T-14C184-AAJ
2: FU5T-14F391-AAA
3: HG9T-14F390-AB
4: HG9T-14G163-AA
5: HP5T-14F389-BC
6: HS7T-14C636-BF
7: HS7T-14G162-CC

Try load from ETIS (use VIN) or
Load from file

I cant write only configuration right now I have errors on writing. I Upload files from you and tray.

Hello,

can the BCM with part number FU5T-14B476-BAL (model year December 2015) be flashed with the VBF files of a Mondeo from 2017?

I would like to flash the BCM with the following VBF files:
1_DG9T-14C187-AB
2_HU5T-14C184-AAR
3_HG9T-14C636-GC
4_HU5T-14F391-AAA
5_HP5T-14F390-DAA
6_HP5T-14F389-CAB
7_HP5T-14G163-FAA
8_HP5T-14G162-AEA

Is this possible or could the BCM module be destroyed by it?
Are the stored keys lost after the update, so that the ignition is no longer on?
Does anyone know if the hardware (BCM) has been changed?

Who can help? Many Thanks!

Ok now flasing is ok. It will see on picture. But after flashing I can not load direct configuration to bcm - errors - conditions not correct, finishing with 62 errors. Remote key is working but ignition won't - " KEY NOT DETECTED".

Flashing files from Kroligoff list - OK. Many thanks.

Please anybody have any idea ?

Another pics

The last one.

What happens if you put the key in the backup slot in the center armrest?

nothing - it's the same no key detected.

I think you need Ford IDS to restore the key Data.

Anybody have any idea ????

Please