UCDS Forum

Does annyone know wich parts i need to retrofit cruise control to a Focus MK3?

I have found the buttons and a small wire loom.

Will it even work?

which part numbers are they?

I have found this number:AM5T9E740AA

I Cannot find annywhere if the cars loom is prewired.

according to what i see at Photo - this one fits to OK-M or OK-VOICE (new type - sync) steering wheel.

Thats correct. iam just gonna try.

I have bought the cruise control switch.

since my russian is not verry good i hope someone can help me with the partnumber for the wire loom.
http://ffclub.ru/topic/250081/jump_1160 ... ry14343144

i have this steering wheel:

look here:

http://www.ucdsys.ru/forum/viewtopic.php?p=1223#p1223

OK thank you !

The steeringwheel wheel in that topic Does not have the voice button is there no difference?

Also Does my airbag need different wiring ifso what finis number?

If you change a steering without cruise buttons (bottom left) and BT/phone buttons (bottom right) for a steering with cruise buttons, then yuo don't need to change upper right joystick.
This joystick have to be replaced if you install a wheel with BT/phone buttons.

Also, if you change a wheel with BT buttons (and no cruise ) for a wheel with BT and cruise buttons, then you don't replace a joystick and you don't need to add any wires.

Also Does my airbag need different wiring ifso what finis number?

no - as far as I know

Great thanks for your help!
iam ready for installing then (i will be using the original steering wheel of the car)

i will let you know next week if it works

Today fitted the cruise control.

the loom had to be modified because it was not the sync version.

Its works excellent! (also on the new C-MAX)

Thanks

you didn't use small extra loom (finis 1801776) inside steering wheel?

No we did not.

Its still: OK Sync

What version of Focus Mk3 do you have?

The light switch seems very different to me?!