Ford Transit 2014 2.2 TDCI 155PS | DPF Problem Change PCM Software Level?
Добавлено: 21 июл 2020, 20:57
Hello Guys i have Problem with my Ford Transit 2014 2.2 TDCI 155 PS
I changed Vaporizer and checked Fuses (everything Ok) Vaporizer working and Injecting.
DPF Differenz Sensor and the Pipe are new and checked (everything Ok)
My Exhausttemperature are all good and Working
My DPF Load goes Up and Down from 120% to 140% and sometimes it setting fault that the DPF is overloaded and the Engine goes in Maintaince Mode
The exhaust temperature goes to 600 degree and working permanently regeneration.
A static Regenaration is not working everytime it says its done but the Load of DPF is to high
A Man what is working for DPF cleaning told me that the new Software Level for PCM is not good and making Problems as like mines.
I readed with my UCDS and hope anyone can help me or send me Old PCM Software level for my Transit
I changed Vaporizer and checked Fuses (everything Ok) Vaporizer working and Injecting.
DPF Differenz Sensor and the Pipe are new and checked (everything Ok)
My Exhausttemperature are all good and Working
My DPF Load goes Up and Down from 120% to 140% and sometimes it setting fault that the DPF is overloaded and the Engine goes in Maintaince Mode
The exhaust temperature goes to 600 degree and working permanently regeneration.
A static Regenaration is not working everytime it says its done but the Load of DPF is to high
A Man what is working for DPF cleaning told me that the new Software Level for PCM is not good and making Problems as like mines.
I readed with my UCDS and hope anyone can help me or send me Old PCM Software level for my Transit