not recognized

[nielsicq]

Today i wanted to use ucds for the first time on my Focus 3 1.6 tdci.

after trying to read as-built configuration the car turns off the ignition and ucds says ''no seed''

how can i fix this?

[zaqik]

"the car turns off the ignition "

the ignition must be ON during reading as-built data

[nielsicq]

"the car turns off the ignition "

the ignition must be ON during reading as-built data

Yes i know, i turned on the ignition but the car shuts the ignition off.

ucds says ''seed incorrect''

Also in the pcm menu it says PCM not recognized

[zaqik]

car shuts the ignition off ... AUTOMATICALLY ???
do you have keyless? and type?

(assumptions: key and battery are OK)

[nielsicq]

car shuts the ignition off ... AUTOMATICALLY ???
do you have keyless? and type?

(assumptions: key and battery are OK)

After turning on the ignition and trying to read the as-built data the ignition turns automaticly off.

The car has keyless entry and keyless start.

Keys and battery are working perfectly ( the car was build May this year)

[zaqik]

probably new firmware version in PCM ... admins must prepare new version of UCDS
(it is my opinion)

[nielsicq]

probably new firmware version in PCM ... admins must prepare new version of UCDS
(it is my opinion)

Thanks! i hope so.

[Darkleo]

probably new firmware version in PCM ... admins must prepare new version of UCDS
(it is my opinion)

Thanks! i hope so.

Oh....
If you have FF3 1.6 TDCi - i think that is porblem
On our marke not sells 1.6 TDCi engine. =(

All i need is save IDS seans with this car.....

Can you help me? I can add support for this type of engine and FF3 asbuilt

[oscarboiro]

hello.
I I have IDS, you need to send a diagnostic session?
Ask me what you need and in a few days locate a 1.6 tdci to collect the data.
Darkleo skype let me know what you need

Ok ill connect with you

[nielsicq]

hello.
I I have IDS, you need to send a diagnostic session?
Ask me what you need and in a few days locate a 1.6 tdci to collect the data.
Darkleo skype let me know what you need

Ok ill connect with you

hi i send my session data to darkleo (econetic 105BHP)

i also can get manny other models on request

[mayak]

oscarboiro and nielsicq

can you save and send to DarkLeo sessions from FF3 1.6EB 150 and FF3 1.6 EB 180?

updating 1.6 EB 150->180 would be GREAT!!!

[Universe]

nielsicq Hi! We need FF3 2.0 petrol 163hp VIN with latest BCMii and PCM part numbers begining from DV6T...

[funkynet]

Hi nielsicq.Could you find the FOCUS II TDCi 2.0 in TAIWAN?

[nielsicq]

Hi nielsicq.Could you find the FOCUS II TDCi 2.0 in TAIWAN?

Sorry i dont understand the question

[Darkleo]

Niels i remember about your. And start making support for your car.