FF3 1.0 ecoboost 100PS PCM remap possible?
Модератор: DanMc85
-
- Сообщения: 22
- Зарегистрирован: 21 ноя 2014, 14:01
FF3 1.0 ecoboost 100PS PCM remap possible?
Hi
Is it possible to remap PCM of 1.0 ecoboost 100PS Focus MK3 to a higher power using UCDS?
Thanks!
Is it possible to remap PCM of 1.0 ecoboost 100PS Focus MK3 to a higher power using UCDS?
Thanks!
-
- Сообщения: 22
- Зарегистрирован: 21 ноя 2014, 14:01
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
In 1.25.009, inside the MotorSoft section there are some PCM chip tuning firmwares.
But there is nothing for 1.0L ecoboost 100PS engine.
May be something will be added in the future.
Can someone please reply if this is the only way to remap/chip tune via UCDS?
But there is nothing for 1.0L ecoboost 100PS engine.
May be something will be added in the future.
Can someone please reply if this is the only way to remap/chip tune via UCDS?
-
- Сообщения: 19
- Зарегистрирован: 16 ноя 2014, 20:18
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
You can change 1,0 eb 100ps to 125ps without using Motorsoft
-
- Сообщения: 22
- Зарегистрирован: 21 ноя 2014, 14:01
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
Thanks for responding. This is my first car and I am new to these kind of mods
It would be really helpful if you can explain in more detail or please provide some resources with such info.
It would be really helpful if you can explain in more detail or please provide some resources with such info.
-
- Сообщения: 227
- Зарегистрирован: 10 мар 2013, 18:23
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
be careful - engine head in 1.0eb 125 is different comparing to 1.0 100 and many 1.0 100 are without start-stop (market dependent) while all 1.0 125 have it = DTCs
-
- Сообщения: 22
- Зарегистрирован: 21 ноя 2014, 14:01
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
Thanks for your concern.
My car is 1.0 ecoboost 100PS with start/stop and manual transmission.
Do you know any possibility to remap this engine config to a higher one?
My car is 1.0 ecoboost 100PS with start/stop and manual transmission.
Do you know any possibility to remap this engine config to a higher one?
-
- Сообщения: 227
- Зарегистрирован: 10 мар 2013, 18:23
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
send me VIN on priv
-
- Сообщения: 22
- Зарегистрирован: 21 ноя 2014, 14:01
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
PM sent. Thank you!
-
- Сообщения: 16
- Зарегистрирован: 14 ноя 2017, 21:57
- Откуда: Germany
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
Hello,
I also want to switch to the 125 ps map. can someone explain more exactly how it works?
Thank you
I also want to switch to the 125 ps map. can someone explain more exactly how it works?
Thank you
-
- Сообщения: 301
- Зарегистрирован: 16 сен 2016, 13:24
- Откуда: Belgium
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
What about the 125HP version to 140HP?
@twincept How to change the 100HP map to 125HP map if u don't need to use Motorsoft?
@twincept How to change the 100HP map to 125HP map if u don't need to use Motorsoft?
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;
Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;
Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;
-
- Сообщения: 22
- Зарегистрирован: 21 ноя 2014, 14:01
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
My car has a 1.0 ecoboost 100PS with auto start stop.
I uploaded PCM with the following 125PS engine files.
SBL: CV61-14C273-CB
Config: CV61-14C204-AVB (there is also a newer version with AVC but I haven't tried)
The 125PS has 6 speed transmission but works with 5 speed 100PS. The only annoying thing is the 6th gear upshift indication in IPC.
For me the fuel economy was bad after switching to 125PS.
I uploaded PCM with the following 125PS engine files.
SBL: CV61-14C273-CB
Config: CV61-14C204-AVB (there is also a newer version with AVC but I haven't tried)
The 125PS has 6 speed transmission but works with 5 speed 100PS. The only annoying thing is the 6th gear upshift indication in IPC.
For me the fuel economy was bad after switching to 125PS.
-
- Сообщения: 301
- Зарегистрирован: 16 сен 2016, 13:24
- Откуда: Belgium
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
Remove the shift indicator in UCDS
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;
Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;
Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;
-
- Сообщения: 227
- Зарегистрирован: 10 мар 2013, 18:23
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
also cruise control will not work after that change
-
- Сообщения: 22
- Зарегистрирован: 21 ноя 2014, 14:01
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
Of course, shift indicator can be disabled!
No problem with Adaptive Cruise Control for me
No problem with Adaptive Cruise Control for me
-
- Сообщения: 5
- Зарегистрирован: 26 мар 2018, 18:39
Re: FF3 1.0 ecoboost 100PS PCM remap possible?
Hello. I'm new. Could you explain step by step how to increase power? I have a full license and V3 adapter.
Thank you.
Thank you.