UCDS Adapter generating errors

Resolving problems with software and hardware

Модератор: DanMc85

Ответить
Da_Teach
Сообщения: 3
Зарегистрирован: 24 окт 2017, 14:57

UCDS Adapter generating errors

Сообщение Da_Teach »

I recently received the UCDS adapter and I used it as follows:

* Car completely turned off
* Plugin adapter in OBD port
* Start UCDS
* Enable Can Mode
* Goto "Mondeo 5"
* Press Read DTC
* Turn on car

As soon as I turn on the car things "go wrong" (even before pressing "continue" in the ucds program). The car starts to give errors of about every system it has. If I unplug the device, the errors go away (except for a 'visit dealer' icon, that goes away after a certain time).

As soon as I press "continue" I get the following log (shortened a bit since its the same throughout the log):
All modules reading DTC stating...
16:18:46 zondag 12 november 2017
---------------------------------------
DTC Error read - ABS
The module does not answer
---------------------------------------
DTC Error read - ACCM
The module does not answer
---------------------------------------
DTC Error read - ACM
The module does not answer
---------------------------------------
DTC Error read - AHCM
The module does not answer
---------------------------------------
DTC Error read - APIM
DTC Errors: 2

U0151 - Lost Communication With Restraints Control Module

U0151 - Lost Communication With RCM
Ext.Status: 2B - Closed.(DTC) Present at Time of Request.
00- Error status not found in base....

U0155 - Lost Communication With Instrument Panel Cluster Control Module

U0155 - Lost Communication With The Instrument Panel Cluster Control Module
Ext.Status: 2B - Closed.(DTC) Present at Time of Request.
00- Error status not found in base....
---------------------------------------
DTC Error read - BCM
DTC Errors: 5

U0212 - Lost Communication With SCCM

U0212 - Lost Communication With Steering Column Control Module
Status: 87 - Missing Message
Ext.Status: 0A - Minimum Adaption Limit Not Reached.(DTC) Present at Time of Request.

U0151 - Lost Communication With Restraints Control Module

U0151 - Lost Communication With RCM
Status: 87 - Missing Message
Ext.Status: 8A - Minimum Adaption Limit Not Reached.(DTC) Maturing - Intermittent at Time of Request.

U0121 - Lost Communication With ABS Control Module

U0121 - Lost Communication With The ABS Control Module
Status: 87 - Missing Message
Ext.Status: 0A - Minimum Adaption Limit Not Reached.(DTC) Present at Time of Request.

U0131 - Lost Communication With PSCM

U0131 - Lost Communication With Power Steering Control Module
Status: 87 - Missing Message
Ext.Status: 0A - Minimum Adaption Limit Not Reached.(DTC) Present at Time of Request.

B1026 - Steering Column Lock

B1026 - Send Button Circuit Failure
Status: 93 - No Operation
Ext.Status: 0A - Minimum Adaption Limit Not Reached.(DTC) Present at Time of Request.
---------------------------------------
The main issue seems that modules are losing connection with other modules (as soon as I plugin the UCDS/odb adapter).

I also tried ForScan and ForScan only seems to detect the HS-CAN, nothing else . The modules that it finds are the same ones that are throwing the above errors.

I've written to support, but may be someone else had a similar problem and can possibly help me.

Regards, J.

ecumix
Сообщения: 17
Зарегистрирован: 11 ноя 2017, 16:39

Re: UCDS Adapter generating errors

Сообщение ecumix »

I also have problem in ucds need another adapter all time when i plug in to car i always find CAN module but not find on MS-CAN ?


ecumix
Сообщения: 17
Зарегистрирован: 11 ноя 2017, 16:39

Re: UCDS Adapter generating errors

Сообщение ecumix »

From here


https://www.ebay.pl/itm/UCDS-UCDSYS-FOR ... Sw7khaAY34




all good reflash ok upadate ok all its good but ms can not work

ecumix
Сообщения: 17
Зарегистрирован: 11 ноя 2017, 16:39

Re: UCDS Adapter generating errors

Сообщение ecumix »

So anyone explain me why ucds onlu find can module ?

"ms can "no comunication

when start program slide can on and when i diagnostic all module i find only can module rest of then no found !

Da_Teach
Сообщения: 3
Зарегистрирован: 24 окт 2017, 14:57

Re: UCDS Adapter generating errors

Сообщение Da_Teach »

I purchased through this website (using the contact form on this page: https://www.ucdsys.ru/?page_id=93&lang=en ). Also it should include a extended license and has level 1 token, etc.

But like ecumix, it will not read anything other than the HS-CAN. When plugging in the adapter it seems that all modules on the other CAN's (like MS-CAN, not sure if my car has anything other then HS and MS CAN) become unreadable for the adapter *and* for the car (which is probably why it's giving all the DTC's about "losing communication")

ecumix
Сообщения: 17
Зарегистрирован: 11 ноя 2017, 16:39

Re: UCDS Adapter generating errors

Сообщение ecumix »

Da_Teach i also have extd. licence and 3 credit lvl and i tested 20 cars also the same and the last time i flash bcm custom from2016 year no problem but why i cant see module on ms can ?
Any moderator is here from this forum because no help no answer ?

If someone give me advice buy new one adapter i buy it!!! but no answer .... i dont understand

Аватара пользователя
kroligoff
Сообщения: 1496
Зарегистрирован: 16 янв 2013, 11:38

Re: UCDS Adapter generating errors

Сообщение kroligoff »

Please contact over "Contact form" https://www.ucdsys.ru/?page_id=42&lang=en
I think may be hardware problem with adapter.

ecumix
Сообщения: 17
Зарегистрирован: 11 ноя 2017, 16:39

Re: UCDS Adapter generating errors

Сообщение ecumix »

I resolve my problem with adapter now works great !!!!

ghiamkiii
Сообщения: 10
Зарегистрирован: 28 фев 2020, 18:07
Откуда: The Netherlands

Re: UCDS Adapter generating errors

Сообщение ghiamkiii »

Hello ecumix,

I have the same problem and you said you resolved it, what did you do ?
Please can you help me ?

Ответить