Keyless to handsfree

New Ford cosmic car

Модератор: DanMc85

Ответить
Shurka
Сообщения: 20
Зарегистрирован: 22 окт 2017, 21:44

Keyless to handsfree

Сообщение Shurka »

Hello,

it is possible to change the keyless system to a handsfree system?

I had a renault megane before and miss this system.
For those who do not know it - in addition to the keyless opening and closing by touching on the door handle, also you can easily move away from the car and the doors close automatically.

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: Keyless to handsfree

Сообщение dragunov »

I wonder this aswell
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

Shurka
Сообщения: 20
Зарегистрирован: 22 окт 2017, 21:44

Re: Keyless to handsfree

Сообщение Shurka »

I think that the required hardware is already installed.

After all, the keyless opening also first checks whether the key is near the car. So it should be possible that the presence of the key is controlled to close the car as soon as I move away from the car.

And even the keyless closing over the tapping on the door handle, certainly also checks whether the key is nearby.

Or am I wrong?

dragunov
Сообщения: 301
Зарегистрирован: 16 сен 2016, 13:24
Откуда: Belgium

Re: Keyless to handsfree

Сообщение dragunov »

Not at all!
Ford Focus II Trend++ 1600 TDCi 109HP+; Aquarius Blue; Year built: April 2005; RIP: June 2016;

Ford Mondeo V Titanium 2.0TDCi 150HP+; Panther Black; First Edition Pack; Year built: February 2015;

Shurka
Сообщения: 20
Зарегистрирован: 22 окт 2017, 21:44

Re: Keyless to handsfree

Сообщение Shurka »

no chance?

Mondi_1.6
Сообщения: 4
Зарегистрирован: 26 май 2018, 08:36

Re: Keyless to handsfree

Сообщение Mondi_1.6 »

You need ;
1- exterior door handles with antenna
2- Door wiring between antenna and door to body socket. You dont need to worry about ip wiring if you have keyless start you have wiring to bcm
3- Correct BCM software
4- Correct BCM configuration
5- I am not sure but you also need to configure pcm and ipc

Ответить