IPMA update fail in s-max

[chiptuning.nysa]

Hi,

during update got fail after flashing "ECU Software #2 Part" and now current software part if "NRC: Request: Out of Range [0x31]"

Part no is FU5A-17E678-PF and it's retrofited.

How to fix?

00:00:03:122: Programming is started...
00:00:03:357: Programming mode OK!
00:00:04:359: Requesting security mode...Please wait...
00:00:04:373: Security mode granted!
00:00:04:425: Loading Secondary Bootloader...
00:00:04:601: Secondary Bootloader successfully loaded and initialized.
00:00:04:664: Erasing flash...
00:00:04:668: Erasing flash block 1 from 1 ...
00:00:15:716: Erasing flash finished.
00:00:15:775: Programming flash block 1 from 1 ...
00:01:40:130: Checking...
00:01:52:489: Erasing flash...
00:01:52:496: Erasing flash block 1 from 1 ...
00:01:53:573: Erasing flash finished.
00:01:53:632: Programming flash block 1 from 1 ...
00:02:03:684: Checking...
00:02:10:461: Erasing flash...
00:02:10:465: Erasing flash block 1 from 1 ...
00:02:10:476: Erasing flash finished.
00:02:10:529: Programming flash block 1 from 1 ...
00:30:07:263: Block #1 loading failed.
00:30:07:275: Failed to programming flash!
00:30:07:282: Programming failed...

[chiptuning.nysa]

Done,

Example:
VBF-loader:

1. SBL DA5T-14G021-BA
+DS7T-14G019-EM
+DS7T-14G024-EJ

2. SBL DA5T-14G021-BA
+HS7T-14G082-EB

3. SBL DA5T-14G021-BA
+HS7T-14G081- EB



activate "deep sleep" modules.....
activate "dead modules"